| Antiperspirant
spray / Antiperspirant spray
Rezeptur Nr./Formulation no. : F-1724,302 |
||
| Bestandteil/Component | % | Funktion/Function |
| I. | ||
| Emulgade® SE Glyceryl Stearate (and) Ceteareth-20 (and) Ceteareth-12 (and) Cetearyl Alcohol (and) Cetyl Palmitate |
4,5 |
O/W-Emulgator/
O/W emulsifier |
| Eumulgin® B 2 Ceteareth-20 |
1,0 | O/W-Emulgator/
O/W emulsifier |
| Cetiol® LC Coco-Caprylate/Caprate' |
5,0 | Emollient |
| Cetiol® OE Dicaprylyl Ether |
5,0 | Emollient |
| II. | ||
| Aqua |
15,8 | |
| III. | ||
| Aqua |
48,7 | |
| IV. | ||
| Locron
L (Fa. Hoechst) Aluminum Chlorohydrate |
20,0 | |
| Konservierung
, Parfüm preservative, perfume |
n.B./q.s. |
|
| pH-Wert/pH value |
4,2 | |
| Viskosität,
23�
C m Pas Brookfield RVF, Spindel/rotor: 5, UpM/rpm: 10 |
< 100 | |
|
Herstellung im Labormaßstab 1. Phase I auf 80� C erwärmen und homogen verrühren. 2. Phase II auf 80� C erwärmen, unter Rühren langsam zu Phase I geben und 5 Min. emulgieren. 3. Phase III wird kalt langsam zur 80� C heißen Phase I/II gegeben. 4. Die Emulsion wird unter Rühren so abgekühlt, daß sie in ständig in homogener Bewegung bleibt und keine Luft eingerührt wird. Zugabe von Phase IV bei 30� C. Preparation in the laboratory 1. Heat phase I up to 85� C and stir homogeniously. 2. Heat phase II up to 85� C and stir slowly into phase I. 3. Stir phase III (room temperature) slowly into the hot emulsion I/II (80�C). 4. Allow the emulsion to cool with stirring in such a way that it remains in continual motion. Avoid in corporation of air. Add phase IV at 30� C. All products in the text marked with an ® are registered trademarks of the Henkel group. Suggestions for processing and use of our products as well as possible formulation suggestions are provided noncommittally in accordance with our knowledge and information. They do not discharge our customers from testing the products on suitability for processes and purposes they are destined for. We are only liable for a damage caused intentionally or by gross negligence. However, we are under no circumstances liable for consequential damage. Each processor is liable for the compliance of all legal regulations, including patent legislation. Henkel does not guarantee the suitability of a product for a user-specific purpose. |
| H E N K E L K G a A | Care Chemicals Division | Düsseldorf |
| ||
|
||