| Deo-Emulsion
(PIT) mit Hydagen DCMF / Deo-Emulsion (PIT) with Hydagen DCMF Rezeptur Nr./Formulation no. : 97/023/17 |
||
| Bestandteil/Component | % | Funktion/Function |
| I. | ||
| Eumulgin® B 2 Flakes Ceteareth-20 |
1,0 | O/W Emulgator/O/W emulsifier |
|
Emulgade® SE *** see product sheet *** for further information |
4,5 | O/W
Cremegrundlage SE/ O/W cream base SE |
| Cetiol® S Dioctylcyclohexane |
5,0 | Ölkomponent/emollient |
|
Cetiol® OE Dicaprylyl Ether |
5,0 | Ölkomponent/emollient |
| Hydagen® C.A.T. Triethyl Citrate |
2,0 | Wirkstoff/ active ingredient |
| II. | ||
| Hydagen® DCMF Chitosan |
0,1 | Wirkstoff/ active ingredient |
| Glycolsäure
(Fa. Merk) Glycolic acid |
0,04 | Lösungsmittel/Solvent |
|
Wasser, entionisiert Water, de-ionized |
82,36 | |
|
Herstellung 1. Die Komponenten der Phase I bei 85 - 90 �C aufschmelzen und homogen vermischen. 2. Komponenten der Phase II mit Hilfe eines Flügelrührers bei langsamer Geschwindigkeit homogen lösen, auf 85 - 90 �C erhitzen und langsam sukzessive unter Rühren in die Phase I geben. Die Rührgeschwindigkeit sollte so gewählt sein, daß das Einrühren von Luft vermieden wird. Die Temperatur 5 Minuten halten. 3. Dann unter Rühren abkühlen. Zum Schluß bei ca. 30 �C das Konservierungsmittel zugeben. Preparation 1. Melt the components listed under I at 85 - 90 �C and mix it homogeneous. 2. Mix phase II with stirring in slow motion till it is a homogeneous solution, heat it up to 85 - 90 �C and add it slowly bit by bit to phase I with stirring in such a way that it remains in continual motion. Avoid incorporation of air. Hold the temperature for 5 minutes. 3. Allow the emulsion to cool down. Finish at 30 �C and add the preservative. All products in the text marked with an ® are registered trademarks of the Henkel group. Suggestions for processing and use of our products as well as possible formulation suggestions are provided noncommittally in accordance with our knowledge and information. They do not discharge our customers from testing the products on suitability for processes and purposes they are destined for. We are only liable for a damage caused intentionally or by gross negligence. However, we are under no circumstances liable for consequential damage. Each processor is liable for the compliance of all legal regulations, including patent legislation. Henkel does not guarantee the suitability of a product for a user-specific purpose. |
| H E N K E L K G a A | Care Chemicals Division | Düsseldorf |
![]() |
||