Reichhaltige Nachtpflege /
Rich Night Care

Rezeptur Nr./Formulation no. : 96/108/14
Bestandteil/Component
%
Funktion/Function
I.
EMULGADE® PL 68/50
Cetearyl Glucoside (and) Cetearyl Alcohol

3,0
O/W-Emulsionsgrundlage/
O/W-emulsion base
LANETTE® O
Cetearyl Alcohol

4,0
Konsistenzgeber/
consistency factor
Cetiol®J 600
Oleyl Erucate

4,0
Emollient
CETIOL® V
Decyl Oleate

4,0
Emollient
CETIOL® OE
Dicaprylyl Ether

4,0
Emollient
MYRITOL® 318
Caprylic/ Capric Triglyceride

3,5
Emollient
Baysilon M 350 (Bayer)
Dimethicone

0,5
Entschäumer/Defoamer
COPHEROL® F 1300
Tocopherol
1,0
Schutzadditive/
protection additive
II.
Wasser/water

57,7
 
Glycerin 86%

3,0
Moisturizer
Carbopol 981 (Goodrich)/Carbomer
2%ige Quellung/2% swelling

10,0
 
KOH 20%

0,3
 
Lipocutin®
Aqua (and) Lecithin (and) Cholesterol (and) Decetyl Phosphate

5,00
Wirkstoff/
active ingredient
Konservierung/preservative

n.B./q.s.
 
Parfüm/perfume

n.B./q.s.
 
Viskosität/viscosity mPas
Brookfield RVF, 23� C, Spindel:TE, Helipath,
4 UpM/rpm

 

Herstellung im Labormaßstab

Phase I auf 80� C erwärmen. Phase II auf 80� C erwärmen und unter Rühren in die Fettphase geben. Die Emulsion wird unter Rühren abgekühlt, wobei die Rührgeschwindigkeit so gewählt werden muß, daß die Emulsion zwar in ständiger Bewegung ist, sich aber kein "Rührkegel" bildet und keine Luft eingerührt wird. Die 2%ige Carbopolquellung wird bei 50� C zugegeben; die Neutralisation erfolgt bei 40� C. Zugabe von Konservierungsmittel und Parfüm erfolgt bei Raumtemperatur.

Preparation in the laboratory

Heat phase I to 80� C. Heat phase II to 80� C and add the oil phase while stirring. Allow the emulsion to cool with stirring. The stirring rate must be selected in such a way that the emulsion is kept in continual motion without developing a so-called " stirring cone". Add the 2% Carbopol swelling at 50� C. Neutralization at 40� C. Add preservative and perfume at room temperature.


All products in the text marked with an ® are registered trademarks of the Henkel group.

Suggestions for processing and use of our products as well as possible formulation suggestions are provided noncommittally in accordance with our knowledge and information. They do not discharge our customers from testing the products on suitability for processes and purposes they are destined for. We are only liable for a damage caused intentionally or by gross negligence. However, we are under no circumstances liable for consequential damage. Each processor is liable for the compliance of all legal regulations, including patent legislation.

Henkel does not guarantee the suitability of a product for a user-specific purpose.
H E N K E L  K G a A Care Chemicals Division Düsseldorf