W/O-Babypflegecreme /
W/O babycare cream
Formulation no. 96/086/5
Bestandteil / Component
%
 Funktion / Function
I.
MONOMULS® 90-0-18
Glyceryl Oleate
2,5
W/O-Emulgator/
W/O emulsifier
CETIOL® SQ
Squalane
6,0
Emollient
CETIOL® S
Dioctylcyclohexane
12,0
Emollient
Zinkum N 29 (Bärlocher)
Zinc Stearate
1,0
Stabilisator/
Stabiliser
Lunacera M (HB Fuller)
Cera Microcristallina
2,0
Wax-Komponente/Konsistenzgeber
wax- component, Consistency giving factor
COPHEROL® F 1300
Tocopherol
3,0
Wirkstoff/
Active ingredient
II.
Glycerin 86%

5,0
Moisturiser
Magnesiumsulfat-7H2O

0,7
Stabilisator/Stabiliser
Aqua

67,8
Konservierung/Parfüm
Preservative/perfume
n.B./q.s.
Viscosität/viscosity mPas,
Brookfield RVT,23�C, rotor TE,
Helipath, 4Upm/rpm

210.000

Für solche Produkte ist es unerläßlich, daß qualifizierte Experten, die die Sicherheitsbewertung des Produktes durchführen, die speziellen toxikologischen Aspekte für Kinder unter 3 Jahren berücksichtigen. Besondere Aufmerksamkeit sollte bei der Sicherheitsbewertung solchen Produkten gewidmet werden, die Parfümkomponenten und/oder Ethanol enthalten.

For this products it is essential that qualified persons responsible for the assessment to the safety of the product, take into consideration specific problems related to children under 3 years of age, in their safety evaluation. Special attention should be paid to safety assessment if perfumery materials and/or ethanol are present in the formulation.

Herstellung im Labormaßstab

 Komponenten unter I. bei 80 - 85�C schmelzen und homogen vermischen.
Komponenten unter II. ebenfalls auf 80 - 85�C erwärmen und unter Rühren/Homogenisieren zu Phase I geben. 5 Minuten bei Temperatur rühren.
Unter weiterem Rühren und Luftkühlung so abkühlen, daß die Emulsion in ständiger homogener Bewegung bleibt und keine Luft eingerührt wird. Bei 65 - 55 �C zur Struktur- sowie Stabilitätsverbesserung mit geeignetem Dispergierkopf homogenisieren (z. B. Ultra Turrax), homogen rühren und auf 30�C abkühlen.

Preparation in the laboratory

1. Melt the components listed under I at 80-85 �C and stir until a homogeneous mixture results.
2. Heat the components listed under II to 80-85 �C and add to phase I with stirring/homogenizing. Stir it for 5 minutes at this temperature.
3. Allow the emulsion to cool with a stirring in such way that it remains in continual motion. Avoid incorporation of air. Homogenise at 65-55 �C by means of a suitable dispersion unit (e. g. Ultra Turrax) in order to improve stability and structure. Stir until homo-genous and allow to cool to 30 �C.

All products in the Text marked with an * are registered trademarks of the Henkel group.

Suggestions for processing and use of our products as well as possible formulation suggestions are provided noncommitally in accordance with our knowledge and information. They do not discharge our customers from testing the products on suitability for processes and purposes they are destined for. We are only liable for a damage caused intentionally or by gross negligence. However, we are under no circumstances liable for consequential damage. Each processor is liable for the compliance of all legal regulations, including patent legislation.

Henkel does not guarantee the suitability of a product for a user-specific purpose.
H E N K E L  K G a A Care Chemicals Division Düsseldorf