| Aktivierende
Tagescreme O/W / Day cream O/W with activation effect Rezeptur Nr./Formulation no. : 96/031/2 |
||
| Bestandteil/Component |
%
|
Funktion/Function |
| I. | ||
| Emulgade® SE Glyceryl Stearate (and) Ceteareth-20 (and) Ceteareth-12 (and) Cetearyl Alcohol (and) Cetyl Palmitate |
6,0
|
O/W-Cremegrundlage
SE/ O/W cream base SE |
| Lanette® O Cetearyl Alcohol |
2,0
|
Konsistenzgeber/
consistency giving factor |
| Bienenwachs
8100 (Kahl) Cera Alba |
1,0
|
Konsistenzgeber/
consistency giving factor |
| Cetiol® MM Myristyl Myristate |
2,0
|
Emollient |
| Cetiol® PGL Hexyldecanol (and) Hexyldecyl Laurate |
5,0
|
Emollient |
| Cetiol® OE Dicaprylyl Ether |
4,0
|
Emollient |
| Cetiol® S Dioctylcyclohexane |
3,0
|
Emollient |
| Traubenkernöl
(Henry Lamotte) Vitis Vinifera |
0,5
|
Emollient |
| Copherol® 1250 Tocopheryl Acetate |
1,0
|
Wirkstoff/ active ingredient |
| Neo
Heliopan AV (H & R) Octyl Methoxycinnamate |
2,0
|
UVB-Filter |
| Eusolex
8020 (Merck) 4-Isopropyl-Dibenzoemethan |
1,0
|
UVA-Filter |
| Controx® VP Lecitin (and) Tocopherol (and) Ascorbyl Palmitate (and) Hydrogenated Palm Glycerides Citrate |
0,2
|
Wirkstoff/ active ingredient |
| Vitamin
A-palmitat Vitamin A Palmitate |
0,2
|
Wirkstoff/ active ingredient |
| II. | ||
| Aqua |
66,2
|
|
| 1,4-Butylenglykol/1,4
Butylene Glycol |
4,0
|
Moisturiser |
| III. | ||
| Carbopol
980 (Goodrich) Carbomer |
0,3
|
Stabilisator/stabiliser |
| Cetiol® PGL Hexyldecanol (and) Hexyldecyl Laurate |
1,0
|
Emollient |
| IV. | ||
| KOH,
20% |
0,6
|
Neutralisationsmittel/neutraliser |
| Parfüm/Konservierung perfume/preservative |
n.B./q.s.
|
|
|
Viskosität/viscosity Brookfield, mPas RVF, 23� C, Spindel/spindle TE, 4 UpM/rpm, Helipath |
287.500
|
|
| Herstellung
im Labormaßstab 1. Komponenten unter I. bei 80 - 85�C schmelzen und homogen vermischen. 2. Komponenten unter II. ebenfalls auf 80 - 85�C erwärmen und unter Rühren/Homogenisieren. Phase III. (Carbopol mit Öl vermischt) der heißen Emulsion hinzufügen und sofort mit geeignetem Dispergierkopf homogenisieren (Ultra Turrax). Unter weiterem Rühren und Luftkühlung so abkühlen, daß die Emulsion in ständiger homogener Bewegung bleibt und keine Luft eingerührt wird. Phase IV. bei 40�C hinzufügen. Rührende bei 30�C. Preparation in the laboratory 1. Melt the components listed under I at 80 - 85�C and stir until a homogeneous mixture results. 2. Heat the components listed under II to 80 - 85�C and add to phase I with stirring/homogenizing. Add phase III (Carbopol mixed with oil) into the hot emulsion and and homogenise immediately by means of a suitable dispersion unit (Ultra Turrax). Allow the emulsion to cool with stirring in such a way that it remains in continual motion. Avoid the incorporation of air. Add the single components listed under IV at 40� C. Allow to cool to 30� C. All products in the text marked with an ® are registered trademarks of the Henkel group. Suggestions for processing and use of our products as well as possible formulation suggestions are provided noncommittally in accordance with our knowledge and information. They do not discharge our customers from testing the products on suitability for processes and purposes they are destined for. We are only liable for a damage caused intentionally or by gross negligence. However, we are under no circumstances liable for consequential damage. Each processor is liable for the compliance of all legal regulations, including patent legislation. Henkel does not guarantee the suitability of a product for a user-specific purpose. |
| H E N K E L K G a A | Care Chemicals Division | Düsseldorf |
| ||
|
||