Regenerierende Nachtcreme W/O /
Night cream W/O with regeneration effect
Rezeptur Nr./Formulation no. : 96/030/3
Bestandteil/Component
%
 Funktion/Function
I.
Dehymuls® PGPH
Polyglyceryl-2 Dipolyhydroxystearate
4,0
 W/O-Emulgator/
W/O emulsifier
Lameform® TGI
Polyglyceryl-3 Diisostearate
2,0
 W/O-Emulgator/
W/O emulsifier
Bienenwachs 8100 (Kahl)
Cera Alba
2,0
 Konsistenzgeber/
consistency giving factor
Zincum N 29 (Bärlocher)
Zinc Stearate
2,0
 Stabilisator/stabiliser
Traubenkernöl (Henry Lamotte)
Vitis Vinifera
1,0
 Emollient
Myritol® 312
Caprylic/Capric Triglycerides
3,0
 Emollient
Cetiol® SN
Cetearyl Isononanoate
8,0
 Emollient
Cetiol® OE
Dicaprylyl Ether
5,0
 Emollient
Copherol® 1250
Tocopheryl Acetate
3,0
 Wirkstoff/
active ingredient
Vitamin A Palmitat
Vitamin A Palmitate
0,2
 Wirkstoff/
active ingredient
II.
Aqua
63,3
  
1,4-Butylene Glycole
5,0
 Moisturiser
MgSO4.7H2O
1,0
 Stabilisator/stabiliser
III.
Collapuron® DAK
Desamidocollagen
0,5
 Wirkstoff/
active ingredient
Konservierung/Parfüm
Preservative/perfume
n.B./q.s.
  
Viskosität/viscosity Brookfield, mPas
RVF, 23� C, Spindle/spindle: TE,
4 UpM/rpm, Helipath
112.500

Herstellung im Labormaßstab

1.Komponenten unter I. bei 80 - 85�C schmelzen und homogen vermischen.
2. Komponenten unter II. ebenfalls auf 80 - 85�C erwärmen und unter Rühren homogenisieren. 5 Minuten Rühren bei konstanter Temperatur.
3. Unter weiterem Rühren und Luftkühlung so abkühlen, daß die Emulsion in ständiger homogener Bewegung bleibt und keine Luft eingerührt wird. HomogPhase III bei 30�C hinzufügen. Rührende bei 30�C.

Hinweis:

Dauer und Intensität der Homogenisierung beeinträchtigt die Viskosität des Produkts.

Preparation in the laboratory

1. Melt the components listed under I at 80 - 85�C and stir until a homogeneous mixture results.
2. Heat the components listed under II to 80 - 85�C and add to phase I with stirring/homogenizing. Stir for 5 minutes at this temperature.
3. Allow the emulsion to cool with stirring in such a way that it remains in continual motion. Avoid incorporation of air. Homogenise at 65 - 55�C by means of a suitable dispersion unit (e.g. Ultra Turrax) in order to improve stability and structure. Add the single components listed under III at 30� C. Allow to cool to 30� C.

Hint:

Duration and intensity of homogenization influence the viscosity.

All products in the text marked with an ® are registered trademarks of the Henkel group.

Suggestions for processing and use of our products as well as possible formulation suggestions are provided noncommittally in accordance with our knowledge and information. They do not discharge our customers from testing the products on suitability for processes and purposes they are destined for. We are only liable for a damage caused intentionally or by gross negligence. However, we are under no circumstances liable for consequential damage. Each processor is liable for the compliance of all legal regulations, including patent legislation.

Henkel does not guarantee the suitability of a product for a user-specific purpose.
H E N K E L  K G a A Care Chemicals Division Düsseldorf