| W/O-Lotion
mit Dehymuls® PGPH / W/O Lotion with Dehymuls® PGPH Rezeptur Nr./Formulation no. : 94/066/8 |
||
| Bestandteil/Component |
%
|
Funktion/Function |
| I. | ||
| Dehymuls®
PGPH Polyglyceryl-2 Dipolyhydroxystearate |
3,0
|
W/O-Emulgator/ W/O emulsifier |
| Monomuls®
90-O 18 Glyceryl Oleate |
1,0
|
W/O-Emulgator/
W/O emulsifier |
| Zincum
N 29 (Bärlocher) Zinc Stearate |
1,0
|
Stabilisator/Stabiliser |
| Bienenwachs
8100 (Kahl) Cera Alba |
1,0
|
Konsistenzgeber/ consistency giving factor |
| Cetiol®
SN Cetearyl Isononanoate |
7,0
|
Emollient |
|
Cetiol®
OE |
6,0
|
Emollient |
| Cetiol®
A Hexyl Laurate |
6,0
|
Emollient |
| Eutanol®
G 16 Hexyldecanol |
3,0
|
Emollient |
| II. | ||
| Glycerin
86% |
5,0
|
Moisturizer |
| MgSO4
* 7 H2O |
1,0
|
Stabilisator/Stabiliser |
| Aqua |
66,0
|
|
| Konservierung
/preservatives |
n.B./q.s.
|
|
| Viskosität/viscosity
mPas Brookfield, RVF, 23�C, Spindel/Spindle 5, 10 UpM |
15.000
|
|
|
Herstellung im Labormaßstab 1. Komponenten unter I. bei 80-85� C schmelzen und homogen vermischen. 2. Komponenten unter II. ebenfalls auf 80-85� C erwärmen und unter Rühren zu Phase I. geben. 5 Minuten bei Temperatur emulgieren. 3. Die Emulsion wird unter Rühren und Luftkühlung so abgekühlt, daß sie ständig in homogener Bewegung bleibt und keine Luft eingerührt wird. Bei 65-55� C wird vorsichtig homogenisiert (z.B. Ultra Turrax mit geeignetem Dispergierkopf). Ein intensives Homogenisieren kann unter Umständen eine höhere Viskosität im Endprodukt verursachen. Ggf. Kompensation des Wasserverlustes. 4. Bei Temperaturen unter 30� C Rührende. Preparation on the laboratory scale 1. Melt components under I at 80-85� C and mix homogeneously. 2. Heat components under II to 80-85� C and add to phase I with stirring. Emulsify 5 minutes at this temperature. 3. Allow the emulsion to cool with stirring in such a way that it remains in continual motion. Avoid incorporation of air. Homogenize at 65-55�C by means of a suitable dispersion unit (e.g. Ultra Turrax) in order to improve stability and structure. Intensive homogenisation may cause a higher viscosity in the final product. Eventually compensation of the loss of water. 4. Finish at 30� C. All products in the text marked with an ® are registered trademarks of the Henkel group. Suggestions for processing and use of our products as well as possible formulation suggestions are provided noncommittally in accordance with our knowledge and information. They do not discharge our customers from testing the products on suitability for processes and purposes they are destined for. We are only liable for a damage caused intentionally or by gross negligence. However, we are under no circumstances liable for consequential damage. Each processor is liable for the compliance of all legal regulations, including patent legislation. Henkel does not guarantee the suitability of a product for a user-specific purpose. |
| H E N K E L K G a A | Care Chemicals Division | Düsseldorf |
| ||
|
||