Leichte W/O-Lotion mit Dehymuls® PGPH / Kaltherstellung
Light W/O lotion with Dehymuls® PGPH / cold processed
Rezeptur Nr./Formulation no. : 94/066/56
Bestandteil/Component
%
 Funktion/Function
I.
Dehymuls® PGPH
Polyglyceryl-2 Polyhydroxystearate
3,0
 W/O-Emulgator/
W/O emulsifier
Monomuls® 90-O 18
Glyceryl Oleate
1,0
 W/O-Emulgator/
W/O emulsifier
Zincum N 29 (Bärlocher)
Zinc Stearate
1,0
 Stabilisator/stabiliser
Cetiol® A
Hexyl Laurate
6,0
 Emollient
Cetiol® SN
Cetearyl Isononanoate
7,0
 Emollient
Cetiol® OE
Dicaprylyl Ether
6,0
 Emollient
Eutanol® G 16
Hexyldecanol
3,0
 Emollient
II.
Glycerin 86%

5,0
 Moisturiser
Magnesium-Sulfat x 7H2O
1,0
 Stabilisator/tabiliser
Aqua
67,0
Konservierung /preservatives
n.B./q.s.
Viskosität/viscosity mPas
Brookfield, RVF, 23�C
Spindel/rotor 5, 10 UpM /rpm

9.000

Kaltherstellung im Labormaßstab

1. Die Bestandteile der Fettphase werden bei Raumtemperatur homogen verrührt. Das Aussehen ist durch Zincum N 29 milchig-trüb.
2. Die Wasserphase wird separat gemischt und unter Rühren "sehr langsam", portionsweise zur Fettphase gegeben.
3. Die Emulsion wird 10 Min. nachgerührt und anschließend homogenisiert. Hierbei muß beachtet werden, daß ein der Viskosität angepaßter Homogenisierkopf eingesetzt wird. Intensives Homogenisieren kann zur Erhöhung der Viskosität im Endprodukt führen.

Preparation in the laboratory / cold processed

1. Mix components of phase I at room temperature until uniform. An opaque-milky appearance results do to Zincum N 29.
2. Separately mix components of phase II. Add slowly to phase I while stirring.
3. Stir thoroughly for 10 min. for the emulsion form, then homogenize mechanically by means of a suitable dispersion unit conform to the viscosity. Excessive homogenizing can lead to an increase of the final viscosity.

All products in the text marked with an ® are registered trademarks of the Henkel group.

Suggestions for processing and use of our products as well as possible formulation suggestions are provided noncommittally in accordance with our knowledge and information. They do not discharge our customers from testing the products on suitability for processes and purposes they are destined for. We are only liable for a damage caused intentionally or by gross negligence. However, we are under no circumstances liable for consequential damage. Each processor is liable for the compliance of all legal regulations, including patent legislation.

Henkel does not guarantee the suitability of a product for a user-specific purpose.
H E N K E L  K G a A Care Chemicals Division Düsseldorf