W/O-Creme mit Hydagen® CMF /
Cream W/O with Hydagen® CMF
Rezeptur Nr./Formulation no. : 94/056/4
Bestandteil/Component
%
 Funktion/Function
I.
Lameform® TGI
Polyglyceryl-3 Diisostearate
4,0
 W/O-Emulgator/
W/O emulsifier
Monomuls® 90-O 18
Glyceryl Oleate
2,0
 W/O-Emulgator/
W/O emulsifier
Bienenwachs 8100 (Kahl)
Cera Alba
7,0
 Konsistenzgeber/
consistency giving factor
Cetiol® OE
Dicaprylyl Ether
5,0
 Emollient
Eutanol® G
Octyldodecanol
10,0
 Emollient
Cetiol® LC
Coco Caprylate/Caprate
5,0
 Emollient
II.
Glycerin 86%
5,0
 Moisturiser
MgSO4 x 7H2O
1,0
 Stabilisator/stabiliser
Aqua
56,0
  
Konservierung/preservative
n.B./q.s.
  
III.
Hydagen® CMF
Chitosan Glycolate

5,0
 Wirkstoff/active ingredient

Herstellung im Labormaßstab

1. Komponenten unter I. bei 80 - 85� C schmelzen und homogen vermischen.
2. Komponenten unter II. ebenfalls auf 80 - 85� C erwärmen und unter Rühren zu Phase I. geben. 5 Minuten bei Temperatur emulgieren. HYDAGEN® CMF wird kalt im Emulgierungsprozeß bei 80� C dazugegeben.
3. Die Emulsion wird unter Rühren und Luftkühlung so abkühlen, daß sie in ständig homogener Bewegung bleibt und keine Luft eingerührt wird. Bei 65 - 55� C wird vorsichtig homogenisiert (z.B. Ultra Turrax mit geeignetem Dispergierkopf). Ein intensives Homogenisieren kann eine höhere Viskosität im Endprodukt verursachen. Ggf. Kompensation des Wasserverlustes.
4. Bei Temperaturen unter 30� C Rührende.

Preparation in the laboratory

1. Melt components under I at 80 - 85� C and mix homogeneously.
2. Heat components under II to 80 - 85� C and add to phase I with stirring in such a way that it remains in continual motion. Add HYDAGEN® CMF cold in the emulsifying process at 80� C.
3. Avoid incorporation of air. Homogenize at 65 - 55� C by means of a suitable dispersion unit (e.g. Ultra Turrax) in order to improve stability and structure. Intensive homogenisation may cause a higher viscosity in the final product. Eventually compensation of the loss of water.
4. Finish at 30� C.
All products in the text marked with an ® are registered trademarks of the Henkel group.

Suggestions for processing and use of our products as well as possible formulation suggestions are provided noncommittally in accordance with our knowledge and information. They do not discharge our customers from testing the products on suitability for processes and purposes they are destined for. We are only liable for a damage caused intentionally or by gross negligence. However, we are under no circumstances liable for consequential damage. Each processor is liable for the compliance of all legal regulations, including patent legislation. Henkel does not guarantee the suitability of a product for a user-specific purpose.
H E N K E L  K G a A Care Chemicals Division Düsseldorf