| Reichhaltige
W/O-Creme / Rich cream W/O
Rezeptur Nr./Formulation no. : 93/275/13 |
||
| Bestandteil/Component |
%
|
Funktion/Function |
| I. | ||
| Monomuls®
90-O 18 Glyceryl Oleate |
3,0
|
W/O-Emulgator/
W/O emulsifier |
|
Lameform® TGI |
1,0
|
W/O-Emulgator/ W/O emulsifier |
|
Dehymuls® HRE 7 |
1,0
|
W/O-Emulgator/
W/O emulsifier |
| Bienenwachs
8100 (Kahl) Cera Alba (Beeswax) |
3,0
|
Konsistenzgeber/ consistency giving factor |
| Zincum
N 29 (Bärlocher) Zinc Stearate |
2,0
|
Stabilisator/stabiliser |
| Lanolin
Alcohol |
1,0
|
Emollient |
| Eutanol® G Octyldodecanol |
8,5
|
Emollient |
| Cetiol® 868 Octyl Stearate |
6,5
|
Emollient |
| Cetiol® V Decyl Oleate |
2,0
|
Emollient |
| II. | ||
| Glycerin
86% |
5,0
|
Moisturiser |
| Mg-Sulfate
7H2O |
1,0
|
Stabilisator/stabiliser |
| D-Panthenol
USP Panthenol |
0,5
|
Wirkstoff/ active ingredient |
| Aqua |
65,5
|
|
| Konservierung,
Parfüm preservative, perfume |
n.B./q.s.
|
|
| Viskosität/viscosity Brookfield mPas RVF, 23� C, Spindel/rotor: TE Helipath, 4 UpM/rpm |
725.000
|
|
|
Herstellung im Labormaßstab Die Bestandteile der Phase I werden bei 80� C geschmolzen und homogen verrührt. Phase II wird separat auf 80� C erhitzt und unter Rühren langsam, portionsweise zu Phase I gegeben. Die Emulsion wird unter Rühren abgekühlt. Die Zugabe des Konservierungsmittels erfolgt bei 40� C. Rührende ist bei 25� C. Abschließend wird die Creme durch 2 x Walzen oder einer alternativen Zwangshomogenisierung homogenisiert. Preparation in the laboratory Melt the components listed under I at 80 C and stir homogeneously. Heat the components listed under II to 80 �C and add to phase I with stirring. Allow the emulsion to cool with stirring. Add the preservative at 40� C. Cool to 25�C. Finally homogenize the cream 2 times by use of a triple roller mill or alternative forced homogenization. All products in the text marked with an ® are registered trademarks of the HENKEL group. Suggestions for processing and use of our products as well as possible formulation suggestions are provided noncommittally in accordance with our knowledge and information. They do not discharge our customers from testing the products on suitability for processes and purposes they are destined for. We are only liable for a damage caused intentionally or by gross negligence. However, we are under no circumstances liable for consequential damage. Each processor is liable for the compliance of all legal regulations, including patent legislation. Henkel does not guarantee the suitability of a product for a user-specific purpose. |
| H E N K E L K G a A | Care Chemicals Division | Düsseldorf |
| ||
|
||