| Sprühbare
Sonnenschutz-Emulsion / Sun protection emulsion for spray application Rezeptur Nr./Formulation no. : 93/199/65 LSF/SPF (COLIPA) 9 |
||
| Bestandteil/Component | % | Funktion/Function |
| I. | ||
| Emulgade® SE Glyceryl Stearate (and) Ceteareth-20 (and) Ceteareth-12 (and) Cetearyl Alcohol (and) Cetyl Palmitate |
4,7 | O/W-Emulgator/ O/W emulsifier |
| Eumulgin® B 2 Ceteareth-20 |
1,3 | O/W-Emulgator/ O/W emulsifier |
| Cetiol® 868 Octyl Stearate |
6,0 | Emollient |
| Cetiol® SN Cetearyl Isononanoate |
6,0 | Emollient |
| Neo-Heliopan
E 1000 (H & R) Isoamyl Methoxycinnamate |
4,0 | UV-B Filter |
| Neo-Heliopan
BB (H & R) Benzophenone-3 |
1,0 | UV-Breitbandfilter/ UV broad spectrum filter |
| Copherol® F 1300 Tocopherol |
1,0 | Wirkstoff/ active ingredient |
| II. | ||
| Aqua |
71,0 | |
|
Glycerin 86% |
5,0 | Moisturiser |
| III. | ||
| Konservierung/preservative |
n.B./q.s. |
|
|
Viskosität/viscosity m Pas Brookfield RVF, 23�
C, Spindel/rotor: 2 UpM/rpm: 10 |
< 100 | |
|
Herstellung im Labormaßstab 1. Phase I bei 80-85� C schmelzen und homogen verrühren. 2. Phase II auf 80�-85� C erwärmen und homogen in Phase I einrühren. Mischtemperatur 80-85� C. 3. Die Emulsion wird unter Rühren so abgekühlt, daß sie ständig in homogener Bewegung bleibt und keine Luft eingerührt wird. Konservierung nach Art und Bedarf. Rührende bei 30� C. Preparation in the laboratory 1. Melt phase I at 80-85� C and stir homogeneously. 2. Heat phase II to 80-85� C and stir slowly into phase I. Mixture temperature 80-85� C. 3. Allow the emulsion to cool while stirring. The stirring rate must be selected in such a way that the emulsion is kept in continual motion and no air is trapped. Add preservative up on necessity. End of stirring by 30� C. All products in the text marked with an ® are registered trademarks of the Henkel group. Suggestions for processing and use of our products as well as possible formulation suggestions are provided noncommittally in accordance with our knowledge and information. They do not discharge our customers from testing the products on suitability for processes and purposes they are destined for. We are only liable for a damage caused intentionally or by gross negligence. However, we are under no circumstances liable for consequential damage. Each processor is liable for the compliance of all legal regulations, including patent legislation. Henkel does not guarantee the suitability of a product for a user-specific purpose. |
| H E N K E L K G a A | Care Chemicals Division | Düsseldorf |
| ||
|
||