| Haarspülung
mit Sojasterin / Hair rinse with soybean sterol Rezeptur Nr./Formulation no. : 93/058/7 93/058/28 93/058/29 |
||||
| Bestandteil/Component | % | % | % | Funktion/Function |
| I. | ||||
|
Dehyquart® F 75 Distearoylethyl Hydroxyethylmonium Methosulfate (and) Cetearyl Alcohol |
1,4 | 1,4 | 1,4 | Kationische Grundlage/ cationic base |
| Lanette® O Cetearyl Alcohol |
2,1 | 2,1 | 2,1 |
Konsistenzgeber/ consistancy factor |
| Cutina® MD Glyceryl Stearate |
0,5 | 0,5 | 0,5 | Konsistenzgeber/ consistancy factor |
| Eumulgin® B 2 Ceteareth-20 |
0,8 | 1,0 | 1,0 |
O/W-Emulgator/ O/W emulsifie |
| Generol®
122 N Soybean (Glycine Soya) Sterol |
1,0 | 1,0 | 0,7 | Pflegeadditiv/ care additive |
| Cetiol® SN Cetearyl Isononanoate |
- | 1,0 | - | Emollient |
| Cetiol® V Decyl Oleate |
- | - | 1,0 | Emollient |
| II. | ||||
| Aqua |
94,2 | 93,3 | 93,3 | |
|
Konservierung /preservative |
n.B./q.s. | n.B./q.s. | n.B./q.s. | |
|
Viskosität
nach Herstellung /viscosity after preparation |
16900 | 10300 | 6900 | |
|
Viskosität nach 12 Wochen/ viscosity after 12 weeks (Brookfield RVT, 20 �C, 10 UpM, Spindel/Spindle 4) |
19400 mPas | 14300 mPas | 14600 mPas | |
|
Herstellung
im Labormaßstab Phase I bei 80-85 �C schmelzen. Phase II auf 80-85 �C erwärmen und in Phase I einrühren. 5 Minuten bei Temperatur rühren. Unter Rühren auf 40 �C abkühlen. Zugabe von Konservierungsmittel und ggf. wärmeempfindlicher Addtive. Unter Rühren auf 30 �C abkühlen. Den pH-Wert z. B. mit Citronensäure einstellen. Preparation in the laboratory Melt phase I at 80-85 �C. Heat phase II to 80-85 �C and stir into phase I. Stir at this temperature for 5 minutes. Allow the emulsion to cool to 40 �C with stirring. Add preservative and, if necessary, heat-sensitive additives. Cool down to 30 �C while stirring. Adjust pH value, e.g. with citric acid. All products in the text marked with an ® are registered trademarks of the Henkel group. Suggestions for processing and use of our products as well as possible formulation suggestions are provided noncommittally in accordance with our knowledge and information. They do not discharge our customers from testing the products on suitability for processes and purposes they are destined for. We are only liable for a damage caused intentionally or by gross negligence. However, we are under no circumstances liable for consequential damage. Each processor is liable for the compliance of all legal regulations, including patent legislation. Henkel does not guarantee the suitability of a product for a user-specific purpose. |
| H E N K E L K G a A | Care Chemicals Division | Düsseldorf |
| ||
|
||