| Lippenpflegestift
mit Pigmentfarben und Perlglanz / Lip care stick with pigment colors and pearly shine components Rezeptur Nr./Formulation no. : 93/013/11 |
||
| Bestandteil/Component | % | Funktion/Function |
| I. | ||
| Myritol® 318 Caprylic/Capric Triglyceride |
13,0 | Emollient |
| Myritol® PC Propylene Glycol Dicaprylate/Dicaprate |
6,0 | Emollient |
| Lanolin |
9,5 | Emollient |
| Isopropylpalmitat Isopropyl Palmitate |
12,0 | Emollient |
| Candelilla
Wachs Candelilla Cera |
6,5 | Wachskomponente/Konsistenzgeber wax component/consistency factor |
|
Lunacera M (HB Fuller) Microcristalline Wax |
2,5 | Wachskomponente/Konsistenzgeber wax component/consistency factor |
| Carnauba
Wachs Carnauba Cera (Carnauba Wax) |
1,0 | Wachskomponente/Konsistenzgeber wax component/consistency factor |
| Bienenwachs
8100 (Kahl) Cera Alba (Beeswax) |
4,0 | Wachskomponente/Konsistenzgeber wax component/consistency factor |
| Monomuls® 60-35 C Hydrogenated Palm Glycerides |
3,5 | Konsistenzgeber/ consistency giving factor |
| Controx® KS Tocopherol (and) Hydrogenated Palm Glycerides Citrate |
0,05 | Antioxidant |
| II. | ||
| Hombitex
L 5 (Sachtleben) Titanum Dioxide |
1,0 | UV-Filter |
| Rizinusöl Ricinus Communis (Castor Oil) |
19,25 | Dispergiermittel für UV-Filter und Pigmente/dispersing agent for UV filters and pigments |
| Pigmentfarben
/pigment colors |
2,5 | |
| III. | ||
|
Gluadin®
AGP |
0,2 | Pflegeadditiv/care additive |
| Lipocutin® Water (and) Lecithin (and) Colesterol (and) Decetylphosphat |
5,0 | Moisturiser |
| Glycerin
86% |
5,0 | Moisturiser |
| IV. | ||
|
Irodin
Ti 100 K (Merck) |
9,0 |
Perlglanzgeber/pearliser |
|
Herstellung im Labormaßstab Phase I und Phase II bei 70-80� C schmelzen. Unter Rühren Phase III (70-80� C) zugeben. Anschließend 3-4 mal heiß walzen. Erneut aufschmelzen und Phase IV zugeben. In Formen gießen. Bei Raumtempertur abkühlen lassen und anschließend 1-2 Stunden in das Gefrierfach stellen. Dann Stifte aus der Form nehmen. Preparation in the laboratory Melt part I and II at 70-80� C. Add part II (70-80� C) under stirring. Roll hot for 3-4 times. Melt again and add part IV. Cast into moulds. Allow to cool to room temperature and keep in the ice box for 1-2 hours. Remove sticks from the mold. |
|
Herstellung von Liposomengelen/-konzentraten Kaltherstellung unter Berücksichtigung, daß der pH-Wert vor Zugabe von Lipocutin eingestellt wird. Preparation for liposome gels/-concentrates Cold processing considering that pH value is adjusted prior to adding Lipocutin. All products in the text marked with an ® are registered trademarks of the Henkel group. Suggestions for processing and use of our products as well as possible formulation suggestions are provided noncommittally in accordance with our knowledge and information. They do not discharge our customers from testing the products on suitability for processes and purposes they are destined for. We are only liable for a damage caused intentionally or by gross negligence. However, we are under no circumstances liable for consequential damage. Each processor is liable for the compliance of all legal regulations, including patent legislation. Henkel does not guarantee the suitability of a product for a user-specific purpose. |
| H E N K E L K G a A | Care Chemicals Division | Düsseldorf |
| ||
|
||