| Hand
und Nagel Pflegelotion / Hand and nail lotion
Rezeptur Nr./Formulation no. : 91/245/7 |
||
| Bestandteil/Component | % | Funktion/Function |
| I. | ||
| Emulgade® SE Ceteareth-20 (and) Ceteareth-12 (and) Cetearyl Alcohol (and) Cetyl Palmitate |
6,0 | O/W-Emulsionsgrundlage
SE/ O/W-emulsion base SE |
| Paraffinöl
/ Paraffin Oil Paraffinum Liquidum (Mineral Oil) |
3,0 | Emollient |
| Cetiol® 868 Octyl Stearate |
4,0 | Emollient |
| Copherol® 1250 Tocopheryl Acetate |
0,5 | Wirkstoff/ active ingredient |
| II. | ||
| Glycerin
86% |
3,0 | Moisturiser |
| Panthenol |
1,5 | Wirkstoff/ active ingredient |
| Nutrilan® Keratin W Hydrolyzed Keratin |
61,3 | Konsistenzgeber/ consistency giving factor |
| III. | ||
| Carbopol
954 (Goodrich) Carbomer |
0,4 | Neutralisationsmittel/neutralising agent |
| Aqua |
19,6 | |
| IV. | ||
| KOH 50
% |
0,2 | |
| Konservierung/Parfüm Preservative/perfume |
n.B./q.s. |
|
|
Viskosität/viscosity 23� C mPas |
6.000 | |
|
Herstellung im Labormaßstab 1. Komponenten unter I 85� C schmelzen und homogen verrühren. 2. Komponenten unter II separat auf 80-85� C erwärmen und unter Rühren/Homogenisieren zu Phase I geben. 5 Minuten bei Temperatur rühren. 3. Unter Rühren auf 60� C abkühlen und die bei Raumtemperatur zubereitete Phase III zufügen. 4. Unter Rühren auf 40� C abkühlen, ggf. Parfüm und Konservierung zufügen und mit Phase IV neutralisieren. Unter Rühren auf 30� C abkühlen. Production in the laboratory 1. Heat part I to 85� and mix until homogeneous. 2. Mix and heat part II to 85� C separately. Add part II to part I. Stir at room temperature for 5 minutes. 3. Allow the emulsion to cool to 60� C and incorporate the at room temperature prepared part III. 4. Allow the emulsion to cool to 40� C. Add, if desired, preservative and perfume and neutralise with part IV. Stir until uniform. Allow to cool 30� C. All products in the text marked with an ® are registered trademarks of the Henkel group. Suggestions for processing and use of our products as well as possible formulation suggestions are provided noncommittally in accordance with our knowledge and information. They do not discharge our customers from testing the products on suitability for processes and purposes they are destined for. We are only liable for a damage caused intentionally or by gross negligence. However, we are under no circumstances liable for consequential damage. Each processor is liable for the compliance of all legal regulations, including patent legislation. Henkel does not guarantee the suitability of a product for a user-specific purpose. |
| H E N K E L K G a A | Care Chemicals Division | Düsseldorf |
| ||
|
||