O/W Intensiv-Pflege Creme /
Intensive care cream O/W
Rezeptur Nr./Formulation no. : 90/393/17.1
Bestandteil/Component % Funktion/Function
I.
Lamecreme® DGE 18
Polyglyceryl-2
PEG-4 Stearate		 12,0 O/W-Emulgator mit konsistenzgebenden Eigenschaften/
O/W emulsifier with consistency giving properties
Cetiol® J 600
Oleyl Erucate

 5,0 Emollient
Cetiol® SB 45
Butyrospermum Parkii

 4,0 Emollient
Cutina® E 24
PEG-20 Glyceryl Stearate

 3,0 O/W-Emulgator/O/W emulsifier
II.
Glycerin 86%ig

 3,0 Moisturizer
Gluadin® Almond
Hydrolyzed Almond Protein

 5,0 Wirkstoff/
active ingredient
Aqua ad/up to 100,0  
Konservierungsmittel/preservative

 n.B./q.s.  
Viskosität/viscosity in mPas
Brookfield, RVF, 23 �C
Spindel/Spindle: TE, Helipath, UpM: 4

 ca. 180.000


Herstellung im Labormaßstab
  1. Komponenten unter I bei 80 - 85 �C schmelzen und homogen vermischen.
  2. Komponenten unter II ebenfalls auf 80 - 85 �C erwärmen und unter Rühren/Homogenisieren zu Phase I geben. 5 Minuten bei Temperatur rühren.
  3. Unter weiterem Rühren und Luftkühlung so abkühlen, daß die Emulsion in ständiger homogener Bewegung bleibt und keine Luft eingerührt wird. Bei 65 - 55 �C zur Struktur- sowie Stabilitätsverbesserung mit geeignetem Dispergierkopf homogenisieren (z.B. Ultra Turrax), homogen rühren und auf 30 �C abkühlen.
Preparation in the laboratory
  1. Melt the components listed under I at 80 - 85 �C and stir until homogeneous.
  2. Heat the components listed under II to 80 - 85 �C and add to phase I while stirring. Stir for 5 minutes at this temperature.
  3. Allow the emulsion to cool while stirring in such a way that it remains in continual motion. Avoid the incorporation of air. Homogenise at 65 - 55 �C by means of a suitable dispersion unit (e.g. Ultra Turrax) in order to improve both stability and structure. Stir until homogeneous and allow to cool to 30 �C.
All products in the text marked with an ® are registered trademarks of the Henkel group.

Suggestions for processing and use of our products as well as possible formulation suggestions are provided noncommittally in accordance with our knowledge and information. They do not discharge our customers from testing the products on suitability for processes and purposes they are destined for. We are only liable for a damage caused intentionally or by gross negligence. However, we are under no circumstances liable for consequential damage. Each processor is liable for the compliance of all legal regulations, including patent legislation.

Henkel does not guarantee the suitability of a product for a user-specific purpose.
H E N K E L  K G a A Care Chemicals Division Düsseldorf