| O/W-Gesichtscreme
mit Sonnenschutzfaktor / O/W face cream with sun protection Rezeptur Nr./Formulation no. : 90/338/11 D |
||
| Bestandteil/Component | % | Funktion/Function |
| I. | ||
| Lamecreme®
DGE 18 PEG-4 Polyglyceryl-2 Stearate |
10,0 | Konsistenzgeber/ consistency giving agent |
| Cutina®
E 24 PEG-20 Glyceryl Stearate |
3,0 | O/W-Emulgator/ O/W emulsifier |
| Cetiol®
S Dioctylcyclohexane |
10,0 | Emollient |
| Myritol®
318 Caprylic/Capric Triglyceride |
10,0 | Emollient |
| Parsol
MCX (Givaudan) Octyl Methoxycinnamate |
0,5 | UVB-Filter |
| Uvinul
M 40 (BASF) Benzophenone-11 |
0,5 | Breitbandfilter/ broad spectrum filter |
| Baysilon
M 350 (Bayer) Dimethicone |
0,5 | Entschäumer/defoamer |
| II. | ||
| Glycerin
86% |
5,0 | Moisturiser |
| Aqua |
42,5 | |
| III. | ||
| Carbopol
980 (Goodrich) Carbomer (2%ig /2% sol.) |
10,0 | Konsistenzgeber/ consistency giving agent |
| IV. | ||
| Parfüm
/ Konservierungsmittel Perfume /preservative |
n.B./q.s. | |
| V. | ||
| NaOH 1
% |
8,0 | Neutralisationsmittel/neutraliser |
| Viskosität/viscosity
mPas Brookfield RVF, 23� C, Spindel/rotor: Helipath TE, UpM/rpm:4 |
approx. 220.000 |
|
|
Herstellung im Labormaßstab Phase I auf 85� C erwärmen und homogen verrühren. Phase II ebenfalls auf 85� C erwärmen und zu Phase I hinzugeben. 5 Min. bei Temperatur rühren. Unter Rühren auf 60� C abkühlen und unter die bei Raumtemperatur vorbereitete Phase III hinzufügen. Unter Rühren auf 40� C abkühlen, Phase IV zugeben und mit Phase V neutralisieren. Homogen verrühren und auf 30� C abkühlen. Preparation in the laboratory Heat components listed under I to 85� C and mix until smooth. Mix an heat part II to 85� C separately. Add part II to part I. Stir at temperature for 5 min. Mix and allow the emulsion to cool to 60� C and incorporate the at room temperature prepared part III. Mix and allow the emulsion to cool to 40� C. Add part IV and neutralise with part V. Stir until uniform. Allow the emulsion to cool to 30� C. All products in the text marked with an ® are registered trademarks of the Henkel group. Suggestions for processing and use of our products as well as possible formulation suggestions are provided noncommittally in accordance with our knowledge and information. They do not discharge our customers from testing the products on suitability for processes and purposes they are destined for. We are only liable for a damage caused intentionally or by gross negligence. However, we are under no circumstances liable for consequential damage. Each processor is liable for the compliance of all legal regulations, including patent legislation. Henkel does not guarantee the suitability of a product for a user-specific purpose. |
| H E N K E L K G a A | Care Chemicals Division | Düsseldorf |
| ||
|
||